---
title: ARMA3 – Initial Setup
description: "SETUP GUIDE A step-by-step guide to your BESTNET-GSERVER Arma 3 dedicated server, from ordering to playing with friends and logging in as an administrator, written so that first-time users can follow it without getting lost. v2.0 (November 2026) BESTNET LLC…"
url: "https://gss.bestnetllc.co.jp/en/docs/arma3-initial-setup/"
updated: "2026-11-03"
category: Arma 3
---

# ARMA3 – Initial Setup

SETUP GUIDE

A step-by-step guide to your BESTNET-GSERVER Arma 3 dedicated server, from ordering to playing with friends and logging in as an administrator, written so that first-time users can follow it without getting lost.

  v2.0 (November 2026) BESTNET LLC About 8 min read    Revision history

**v2.0**
 : November 2026 — Fully revised for the rebuilt server configuration (checking the connection address, admin login, Startup tab items, mods and backups now match the new configuration).

**v1.0**
 : First edition.

## About this guide

This guide covers everything from the moment your order is complete until you are playing with friends and can log in as an administrator. Everything is done from the game panel.

 **Each player needs their own copy of the game (Arma 3).** You do not need your own Steam account to build or update the server. Our servers are for the PC version of Arma 3. You normally do not need to set up any ports. The four ports the game uses (game, server list query, Steam and BattlEye) are assigned automatically.

## STEP1 Wait for the installation to finish

Once payment is complete, the server is set up automatically. Because the game (about 5GB) is installed, the first build took about 7 minutes in our tests. When the installation finishes, the server starts automatically.

During the build, the files are checked and anything missing is downloaded again automatically. If the files still cannot be completed, the build is treated as failed, so you never receive a server left half-installed.

 You cannot connect from the game during this time. You can follow the progress in the Console of the game panel.

## STEP2 Check that the server has started and where to connect

Open the Console in the game panel. Every time the server starts, lines beginning with `[bestnet]` are shown as follows (these console messages are in Japanese).

```
[bestnet] 管理者パスワード(ゲーム内のチャットで #login に続けて入力): <admin password>
[bestnet]   (パネルの起動タブの Admin Password に入力すると、次の起動からその値になります)
[bestnet] 接続先(ダイレクト接続): <IP>:<port>
```

- The first line is the admin password. Type it after `#login` in the in-game chat.
- The second line says that if you enter a value in Admin Password on the Startup tab, that value is used from the next start.
- The third line is the address for Direct Connect (IP and port).

The game then starts. When the following line appears, the server is ready (in our tests, about 20 to 25 seconds after starting). You can connect from this point.

```
Host identity created.
```

 The admin password is shown in the console as it is. Take care when streaming or sharing your screen, or when sub-users can see the console.

## STEP3 Join from the game

The usual steps are as follows.

1. Start Arma 3 and select **MULTIPLAYER**.
2. Select **DIRECT CONNECT** at the bottom of the server browser.
3. Enter the IP and port from the Direct Connect address line in [STEP2](#sec-step2).
4. If you have set a join password, enter it as well.

 Button names may differ depending on the game's display language and version. The server may also appear in the server browser (Internet) under its server name, but this is not guaranteed. If you cannot find it, use Direct Connect.

## STEP4 Log in as administrator

An admin password is created automatically for each server. You can check it on the console line in [STEP2](#sec-step2), or in `.bestnet/admin_password` under Files in the game panel.

1. Join the server from the game.
2. Open the chat and type `#login` followed by the admin password (for example `#login <admin password>`).

 To use a password of your own, enter it in `[SERVER] Admin Password` on the Startup tab and restart. That value is used from the next start, and it is not shown in the console. While a value is set on the Startup tab, `.bestnet/admin_password` still holds the previously created automatic value (it is not the current password).

For details, see [How to Log In as Administrator on Your ARMA3 Server](https://gss.bestnetllc.co.jp/en/docs/how-to-add-an-administrator/).

## Startup tab items

You can change the server settings under Startup in the game panel. After changing a value, restart the server from the Console.

[![Startup screen of the game panel. Rows 1 to 4 of the variables, from Server Binary to [MOD] Optional Client Mods](https://gss.bestnetllc.co.jp/wp-content/uploads/2026/11/arma3-kb-startup-1.jpg)](https://gss.bestnetllc.co.jp/wp-content/uploads/2026/11/arma3-kb-startup-1.jpg)
Startup variables (rows 1 to 4)

[![Startup screen of the game panel. Rows 5 to 7 of the variables, from [ADVANCED] Headless Clients to Disable Verbose Logging](https://gss.bestnetllc.co.jp/wp-content/uploads/2026/11/arma3-kb-startup-2.jpg)](https://gss.bestnetllc.co.jp/wp-content/uploads/2026/11/arma3-kb-startup-2.jpg)
Startup variables (rows 5 to 7). The Server Name in the figure is a value used for this screenshot

[![Startup screen of the game panel. Rows 8 to 10 of the variables, from Load Mission To Memory to [UPDATE] Validate Game Files](https://gss.bestnetllc.co.jp/wp-content/uploads/2026/11/arma3-kb-startup-3.jpg)](https://gss.bestnetllc.co.jp/wp-content/uploads/2026/11/arma3-kb-startup-3.jpg)
Startup variables (rows 8 to 10)

| Item | Description | Default |
| --- | --- | --- |
| `Server Binary` | The file that is started. You can choose `arma3server_x64` (64-bit, recommended) or `arma3server` (32-bit). | `arma3server_x64` |
| `Max Players` | The maximum number of players at the same time. It is not set by your plan. | 32 |
| `Server Password` | The password needed to join. If it is empty, there is no password (anyone can join). | Empty = none |
| `[MOD] Mod Preset File (Arma 3 Launcher .html)` | The file name of a mod preset (.html) exported from the Arma 3 Launcher. If it is empty, `modlist.html` is used when that file exists. | Empty |
| `[MOD] Mods to Load` | The folder names of the mods to load, separated by `;` (see the [mods article](https://gss.bestnetllc.co.jp/en/docs/how-to-add-mods-to-your-server/)). | Empty |
| `[MOD] Lowercase Mod File Names (Linux)` | Every time the server starts, the file names inside the mod folders are changed to lowercase. | On |
| `[MOD] Server-side Only Mods` | The folder names of mods that only the server loads. | Empty |
| `[MOD] Optional Client Mods (keys only)` | Mods that players may use if they wish. Only the keys (.bikey) in each folder are put into `keys`; the server does not load these mods. | Empty |
| `[ADVANCED] Headless Clients` | The number of headless clients (0 to 5). They start automatically 45 seconds after the server starts and stop together with the server. | 0 |
| `[Advanced] HC Hide Console Output` | Output from headless clients is not shown in the console (errors are not shown either). If the headless clients do not work properly, turn this off and restart to see their output. | On |
| `Server Name` | The name shown in the game's server list. It is not the same as the name shown in the server list of the game panel (the server's name in the panel). | `ARMA3-<service number>-Bestnet-Gserver` |
| `[SERVER] Admin Password` | The password you type after `#login` in the in-game chat. If it is empty, a password is created automatically for each server and shown in the console. | Empty = automatic |
| `[UPDATE] Auto Update` | Every time the server starts, the game files are brought up to the latest version (recommended). If this is off when Arma 3 is updated, the versions no longer match and players cannot join. | On |
| `Disable Verbose Logging` | Adds `-noLogs` to reduce console output. While it is on, `.rpt` logs are not created either. | On |
| `Load Mission To Memory` | Adds `-loadMissionToMemory`. The mission loaded by the first player is kept in memory, so later loads are lighter. | On |
| `Auto Initialize Mission` | Adds `-autoInit` so that the mission starts without waiting for the first player to join. `persistent = 1;` is required in `server.cfg`. | Off |
| `[Advanced] Enable File Patching` | Adds `-filePatching` so that unpacked data can be loaded. | Off |
| `[Advanced] Server FPS` | The upper limit on how many times per second the server processes the game. Raising it also raises the load. | 50 |
| `[UPDATE] Validate Game Files` | When it is on, all game files are checked at the next start, and broken or missing files are downloaded again. Turn it off again once the problem is fixed. Your settings, missions and mods are not touched. | Off |

## Where the files are

Under Files in the game panel (or over SFTP), you will find the following in the top-level folder.

| Location | Contents |
| --- | --- |
| `mpmissions` | The folder for mission files (.pbo) (see the [missions article](https://gss.bestnetllc.co.jp/en/docs/uploading-mission-files-and-game-settings/)). |
| `server.cfg` / `basic.cfg` | The server configuration files. |
| `keys` | The folder for mod keys (.bikey). Keys inside mod folders are copied here automatically when the server starts. |
| Folders starting with `@` | Mods you have uploaded. |
| `.bestnet` | Holds a copy of the automatically created admin password (`admin_password`). |

[![File manager of the game panel. The top-level list shows .bestnet and the mod folders @mod_a and @mod_b](https://gss.bestnetllc.co.jp/wp-content/uploads/2026/11/arma3-kb-files-top.jpg)](https://gss.bestnetllc.co.jp/wp-content/uploads/2026/11/arma3-kb-files-top.jpg)
The top level of Files. `@mod_a` and `@mod_b` are examples of uploaded mods

 Updates never overwrite or delete `server.cfg`, `basic.cfg`, missions, keys, profiles, BattlEye settings, or the mods and presets you uploaded. When a new version of an official file that you have edited is released, it is placed next to your file as `<name>.bn-new`.

## Using mods

You can load mods that you upload. Put the mod folders whose names begin with `@` in the top-level folder using Files or SFTP, enter their names in `[MOD] Mods to Load` on the Startup tab, and restart. Mods are not downloaded automatically from the Steam Workshop, and we do not guarantee that any particular mod will work.

For the steps, see [How to Add Mods to Your ARMA3 Server](https://gss.bestnetllc.co.jp/en/docs/how-to-add-mods-to-your-server/).

## Stopping, reinstalling and backups

### Stopping and saving

When you use Stop or Restart in the game panel, the game saves its progress before it stops (about 3 seconds). Once it has stopped, the console shows the following line (it means "stopped, game exit code 0").

```
[bestnet] 停止しました(ゲームの終了コード 0)
```

If the game crashes (exits abnormally), the server is started again automatically.

### Reinstalling

Reinstalling checks the game files and downloads again only those that are broken or missing. `server.cfg`, `basic.cfg`, missions, keys, profiles and uploaded mods are kept. You will find it under Settings.

### Backups and restoring

You can create and restore backups under Backups in the game panel. Depending on your plan, up to 3 / 5 / 10 / 10 generations are kept. Backups do not include the game itself or uploaded mods; they save missions, settings, keys and profiles, which keeps them small and quick to create. **After restoring, upload your mods again.**

 **When restoring, do not select the option to delete all files before restoring.** The game itself is not in the backup, so the server would no longer start. If that happens, reinstall to put the game files back.

For the steps, see [Restoring from a backup](https://gss.bestnetllc.co.jp/en/docs/restore-from-backup-2/) and [Reinstallation Procedure When the Server Fails to Start](https://gss.bestnetllc.co.jp/en/docs/reinstallation-procedure-when-the-server-fails-to-start/).

## Troubleshooting

### You cannot join yet

Wait until `Host identity created.` appears in the console. The first start after a game update takes longer, because the update is installed first.

### Check that the game versions match

If `[UPDATE] Auto Update` on the Startup tab is on, the server is brought up to the latest version every time it starts. When your own copy of the game is updated, restart the server.

### A mod warning appears

If a mod you specified cannot be found, the console shows the following line (it means "mod not found, not uploaded yet") and the server keeps starting without that mod. Upload the whole folder to the top level, then restart.

```
[bestnet] MOD が見つかりません(まだアップロードされていません): @<name>
```

### The game files seem broken

Turn on `[UPDATE] Validate Game Files` on the Startup tab and restart. All game files are checked and repaired (this can take a few minutes). Turn it off again afterwards. Reinstalling also fixes this (your settings, missions and mods are kept).

### If the problem continues

Wait a while and restart the server. If it still does not work, please contact support.

## Related articles

- [How to Add Mods to Your ARMA3 Server](https://gss.bestnetllc.co.jp/en/docs/how-to-add-mods-to-your-server/)
- [How to Log In as Administrator on Your ARMA3 Server](https://gss.bestnetllc.co.jp/en/docs/how-to-add-an-administrator/)
- [How to Change the Join Password and Max Players on Your ARMA3 Server](https://gss.bestnetllc.co.jp/en/docs/how-to-change-server-password-and-maximum-number-of-players/)
- [How to Change Your ARMA3 Server Name](https://gss.bestnetllc.co.jp/en/docs/how-to-change-the-server-name/)
- [How to Add Missions to Your ARMA3 Server (server.cfg)](https://gss.bestnetllc.co.jp/en/docs/uploading-mission-files-and-game-settings/)
- [Logging into the Game Panel and Feature Overview](https://gss.bestnetllc.co.jp/en/docs/logging-into-the-game-panel-and-feature-overview/)
- [Restoring from a backup](https://gss.bestnetllc.co.jp/en/docs/restore-from-backup-2/)
- [Reinstallation Procedure When the Server Fails to Start](https://gss.bestnetllc.co.jp/en/docs/reinstallation-procedure-when-the-server-fails-to-start/)
- [Arma 3 dedicated server (pricing and plans)](https://gss.bestnetllc.co.jp/en/server/arma3-2/)
