---
title: "RuneScape: Dragonwilds – Changing World Settings (Difficulty and More)"
description: "RUNESCAPE: DRAGONWILDS This guide explains how to change world settings such as difficulty. The in-game editor is not available on our servers, so the change is made by **replacing the world with one created on the PC version**. If you…"
url: "https://gss.bestnetllc.co.jp/en/docs/dragonwilds-world-settings-en/"
updated: "2026-10-03"
category: "RuneScape: Dragonwilds"
---

# RuneScape: Dragonwilds – Changing World Settings (Difficulty and More)

RUNESCAPE: DRAGONWILDS

This guide explains how to change world settings such as difficulty. The in-game editor is not available on our servers, so the change is made by **replacing the world with one created on the PC version**. If you do not own a PC, you can still make the change using **a file created on a friend's PC**.

 About 6 min readUpdated 2026-10-03For RuneScape: Dragonwilds

## About editing from inside the game

The world settings editor inside the game **is not available on our servers**. When you try to open it, a message appears telling you that dedicated servers are not yet supported.

**This is not a mistake on your part.** Editing from inside the game requires a separate communication path from the game itself.

 You can still change the settings — the steps below describe how, without using the in-game editor.

## World settings are decided when the world is created

World settings such as difficulty **are decided when the world is created and are stored inside the save data**. Because of this, the settings of an existing world cannot be rewritten afterwards.

To change them, you **replace the world with one re-created using the settings you want**.

 **The new world starts from the beginning.** Your existing progress (bases, inventory, skills and so on) is not carried over.

However, **the file for your previous world is not deleted**. You can switch back to it later.

## What you will need

- One copy of RuneScape: Dragonwilds for PC (Steam version)

 **It does not have to be your own PC.** A file created on the PC of a friend you play with is fine. If you play only on PlayStation 5 or Xbox, this is how you can make the change.

## Step 1: Create a world on a PC

1. Start Dragonwilds on a PC and **create a new world** with the settings you want.
2. Enter that world once, then quit the game. (The save file is created at this point.)
3. Open File Explorer, type `%LOCALAPPDATA%RSDragonwildsSavedSaveGames` into the address bar and press Enter.
4. Check that a file named **WorldName.sav** is there.

[![The SaveGames folder on a PC. Only the .sav file is uploaded (.sav.backup is not needed).](https://gss.bestnetllc.co.jp/wp-content/uploads/2026/10/kb-dw-world-pcfolder-en.png)](https://gss.bestnetllc.co.jp/wp-content/uploads/2026/10/kb-dw-world-pcfolder-en.png)
The SaveGames folder on a PC. Only the .sav file is uploaded (.sav.backup is not needed).

 **Do not rename the file.** You will use this name as-is in a later step. **Names in Japanese and other non-Latin scripts also work.**

## Step 2: Stop the server

**Stop** the server from the game panel.

 **Do not upload while the server is running.** The save file is in use while the server is up, so the replacement will not take effect correctly.

## Step 3: Upload the save file

In the file manager, open **RSDragonwilds** → **Saved** → **SaveGames**.

 **This is the easiest step to get wrong.** There is also a folder called **Savegames** (lower-case g) in the same place, but **the one actually used is SaveGames (upper-case G)**. A file placed in the lower-case folder will not be loaded.

[![Inside the Saved folder. Use SaveGames (upper-case G), not Savegames (lower-case g).](https://gss.bestnetllc.co.jp/wp-content/uploads/2026/10/kb-dw-world-savegames-en.png)](https://gss.bestnetllc.co.jp/wp-content/uploads/2026/10/kb-dw-world-savegames-en.png)
Inside the Saved folder. Use SaveGames (upper-case G), not Savegames (lower-case g).

Open **SaveGames** and upload the **.sav** file from Step 1.

[![The SaveGames folder after uploading. Your previous world file remains in place.](https://gss.bestnetllc.co.jp/wp-content/uploads/2026/10/kb-dw-world-uploaded-en.png)](https://gss.bestnetllc.co.jp/wp-content/uploads/2026/10/kb-dw-world-uploaded-en.png)
The SaveGames folder after uploading. Your previous world file remains in place.

## Step 4: Choose which world to load

On the **Startup** page, enter the file name without the trailing `.sav` into **[SERVER] Default World Name**.

Example: if you uploaded `MyWorld.sav`, enter `MyWorld`

[![The Startup page. Enter the world name without .sav into [SERVER] Default World Name.](https://gss.bestnetllc.co.jp/wp-content/uploads/2026/10/kb-dw-world-startup-en.png)](https://gss.bestnetllc.co.jp/wp-content/uploads/2026/10/kb-dw-world-startup-en.png)
The Startup page. Enter the world name without .sav into [SERVER] Default World Name.

 The world that loads is **chosen by the name entered here** — not by whichever file is newest.

## Step 5: Start the server and check

**Start** the server, join the world and check that your settings have been applied.

## Returning to your previous world

The file for your previous world **is still in SaveGames**. Replacing the world does not delete it.

Set **[SERVER] Default World Name** back to the original name and restart, and you can **continue your previous world**.

 Replacing a world never deletes the previous one. You can switch back at any time.

## Frequently asked questions

| Question | Answer |
| --- | --- |
| Can I change the settings using only a PlayStation 5 or Xbox? | **No.** A file created on the PC version is required. However, **it does not have to be your own PC** — a file created on the PC of a friend you play with is fine. |
| Is my existing progress carried over? | **No.** The new world starts from the beginning. |
| Will my previous world be deleted? | **No.** Set [SERVER] Default World Name back to the original name and restart to return to it. |
| Can I use non-Latin characters in the world name? | **Yes.** We have confirmed that file names in Japanese work. |

## Related documents

- [RuneScape: Dragonwilds - Initial Setup](https://gss.bestnetllc.co.jp/en/docs/runescape-dragonwilds-initial-setup/)
- [RuneScape: Dragonwilds - Restoring from a Backup](https://gss.bestnetllc.co.jp/en/docs/dragonwilds-restoring-from-a-backup/)
